A sample text widget

Etiam pulvinar consectetur dolor sed malesuada. Ut convallis euismod dolor nec pretium. Nunc ut tristique massa.

Nam sodales mi vitae dolor ullamcorper et vulputate enim accumsan. Morbi orci magna, tincidunt vitae molestie nec, molestie at mi. Nulla nulla lorem, suscipit in posuere in, interdum non magna.

Experimenting and working around problems in LibreCAD

It has been a little while since I have posted anything and especially a long time since I posted anything about CAD. I helped a viewer with some CAD problems and decided it might be helpful to others. This new video was posted tonight.

Gary

Leave Blank:Do Not Change:

Your email:

 

  Tweet

Print Friendly

Making our Electronic Masterpiece

The Final Thermistor Circuit.

The hard part of our electronic design is over… Well sort of. We are just moving into a new phase of it, but at least we will not be talking theory. Finally we are actually going to mount parts to something and start thinking about how we will get it

Continue reading Making our Electronic Masterpiece

Print Friendly

Using CAD in initial design – More work on the Popsicle Crane

The Base Drawing of the Crane.

People normally think of CAD drawings being used to produce finished plans. While that is probably the main use for drawings, CAD is very useful in all stages of design including conception and analysis. I have decided that I will do more work on the Popsicle Crane and

Continue reading Using CAD in initial design – More work on the Popsicle Crane

Print Friendly

LibreCAD tutorial No. 12 – Bevel, Round, Stretch, and double functions

I just posted another LibreCAD tutorial video. I think I have pretty much went through all of the buttons on LibreCAD and the only remaining video to do on it is one with blocks. There are a lot of helpful things you can do for yourself when dealing with blocks and a lot of things

Continue reading LibreCAD tutorial No. 12 – Bevel, Round, Stretch, and double functions

Print Friendly

A new LibreCAD tutorial – toolbars and the divide function.

I am self taught on LibreCAD although I have used other CAD programs. I have learned some things since the first tutorials that can save some keyclicks. I think I have one more tutorial coming on these miscellaneous functions and then I will spend some time creating some blocks and show as much about the

Continue reading A new LibreCAD tutorial – toolbars and the divide function.

Print Friendly

A LibreCAD tutorial – miscellaneous topics part 1

Tonight I posted a new YouTube video – Another LibreCAD tutorial. This one cleans up a mistake I made earlier and explains a button that can cause some problems with the hatch function and probably has a bug associated with it in relation to the line types.

I also explicitly explain some of the tool

Continue reading A LibreCAD tutorial – miscellaneous topics part 1

Print Friendly

Converting from English to Metric and a use for Layers in LibreCAD

I drew a CAD drawing of a popsicle stick using the English Units and wanted to also create one in metric units. I was curious if LibreCAD would automatically calculate the correct values in the dimensions when I did that. It doesn’t. However, it was worthwhile to create a video to show how I

Continue reading Converting from English to Metric and a use for Layers in LibreCAD

Print Friendly

Hatching and Hatching “Gotchas” LibreCAD Tutorial part 2

In the book “Zen and the Art of Motorcycle Maintenance” the author talks about “gumption traps” … things that take the wind out of your sails and makes you want to give up. I would add to his list software that does not act the way you expect it to act. That means something that

Continue reading Hatching and Hatching “Gotchas” LibreCAD Tutorial part 2

Print Friendly

Hatching and Hatching “Gotchas” LibreCAD Tutorial part 1

I just posted another tutorial about LibreCAD in my YouTube Channel. This one is about hatching. Hatching is similar to a fill function in most drawing programs, except hatching fills a surface with a pattern. LibreCAD comes with a library of patterns.

The purpose of doing hatches in drawings is to provide a way of

Continue reading Hatching and Hatching “Gotchas” LibreCAD Tutorial part 1

Print Friendly

Post 62B — A correction to a previous post and video.

Oops… I messed up. In my tutorial No, 8 and post 61A about the LibreCAD select functions, I said the following:

A select (or deselect) window drawn from left to right would only select items completely enclosed. This is incorrect. If the window is drawn from top to bottom it will only select items completely

Continue reading Post 62B — A correction to a previous post and video.

Print Friendly